It's been almost a year since I've updated this blog. That's not good. In the mean time I have brewed a few batches of beer, made some progress on my fermentation chamber and upgrade my equipment a bit.
Brewing beer is a lot of fun and I love the process. Drinking beer is a lot of fun too, but can get a little out of hand. I'm drinking a lot less and I think that's why my brewing and blogging has slowed so much. I'm also just busy. I started going back to school in January and learned very quickly how hard it is to work full time and go to school. It is nice to be completely independent though.
I last brewed in September after purchasing a very nice set up from the head brewer at Bridger Brewing here in Bozeman. It was an all-grain setup with a few kegs. The brewing was a little more extensive and I still haven't quite figured out the kegging bit. I was brewing a season pumpkin beer for a contest but I got busy again and never entered the beer. Today I finally got my last two beers into kegs after 7 months of "fermenting". I don't suggest this for anyone. I think the beer will still be alright, but I don't know yet. After all of this I do have good recipes for an IPA, stout and a pumpkin rye beer.
I'm focusing on school and my health and fitness for the time being. I've got about 3 years of school left. Hopefully I'll do some brewing and update this along the way, but school is first and I must finish. So farewell until next time. I make no promises. Good luck with the brewing. Hopefully I'll drink a few good ones with you out there.
The Beer Experiments
Friday, April 25, 2014
Thursday, May 16, 2013
Update
I have done a terrible job keeping the posts flowing on this blog but I do intend to do better. I can list my excuses for you; I went away for two weeks to Israel, I work 7 days a week for months straight, I haven't had a chance to brew another beer, I'm in the middle of a few projects and I'm in the process of finding a new place and moving.
In the mean time I thought I'd let you know that the next few posts will include my fermentation chamber build, currently in progress, my wort chiller build, also currently in progress, my coffee stout and my raspberry wheat ale, waiting in secondary. I m still working a lot and in the process of moving but I plan to start the next brew this weekend and keeping up with the blog a bit better.
I hope you have all had a great time celebrating American Craft Brew Week! I know I did. I enjoyed a great milk stout from a special keg from the head brewer at Blackfoot River Brewing.
In the mean time I thought I'd let you know that the next few posts will include my fermentation chamber build, currently in progress, my wort chiller build, also currently in progress, my coffee stout and my raspberry wheat ale, waiting in secondary. I m still working a lot and in the process of moving but I plan to start the next brew this weekend and keeping up with the blog a bit better.
I hope you have all had a great time celebrating American Craft Brew Week! I know I did. I enjoyed a great milk stout from a special keg from the head brewer at Blackfoot River Brewing.
An American Lager
For my next challenge I thought I would take on the lager. A lager is typically a harder beer to brew because it takes a much longer time (it is a slow, cold temperature, bottom fermenting beer). The yeast is meant to ferment at colder temperatures. If the beer does ferment at a warmer temperature you get 'fruity esters' or a fruitier and sweeter beer. This means that brewing a lager is a very delicate process. You can find many stories on-line where people talk about their beers freezing or having bad taste from a warmer temperature. Here's my experience.
Here's where it gets interesting. My yeast said that 58F was just about the max of the ideal temperature range which is the temperature in our house so I fermented the beer on our kitchen counter. It turns out that this was probably a bit warm. I switched the lager into secondary ferment after 3 weeks and decided to put the beer in the colder garage to encourage more of a lager fermentation. I bottled 3 beers when I switched it to secondary and added the sugar tabs to ferment, this did not work. The beer tasted fine and fairly strong but it did not carbonate at all. I finally bottled the lager after 27 days with 7.5 oz priming sugar. I kept the beers in our living room (58F) for the first week and the beers were not fermenting again so I moved the beers to the garage and they had already (after 3 days) shown signs of carbonating. We tried one a few nights later and, despite a slight sweet apple-juice like flavor, there is hope for it yet. It looked like there could have been some mold in the top of the lager after secondary but this doesn't seem to have affected it. A lager ferments very slowly and even an ale will get better and possibly change flavor in the bottle with age. I can say that it is very obvious to me now what a huge role the temperature at fermentation and bottle play in the making of a lager. And the secondary fermentation, especially for a lager, made the beer much more clear, it looks awesome. After all the time my lager did maintain a slight fruity flavor and it carbonated too well in the bottle, a little bit messy but alright. Sorry for the delay, this should have been posted two months ago but I've been away and very busy.
American
Lager
1lbs Briess
Caramel Crystal Malt Lovibond 10
Caramel
10 can be described as having a Candy-like Sweetness, and mild caramel flavor.
It's golden in color and it also helps with head retention
It's golden in color and it also helps with head retention
2lbs
Weyermann Munich Malt Lovibond 8.1-9.9
Darker
Munich malt. Used as a base for many German beer styles. Fest
beers, bocks, ales. Enhances
malty flavor and aroma.
2lbs
Muntons Extra Light DME – color max 7 EBC/Lovibond 3
Great
for all beer styles. Adds extra body and richness. Especially useful when
brewing American and English Style Beers and Light Lagers
3lbs
Briess Dried Malt Extract – Golden Light
An excellent light-colored pure
malt extract. Use alone for light-colored beers, or with specialty malts to
brew beers of all styles. Excellent for boosting gravity and yeast propagation.
Made from Base Malt and Carapils® Malt. Color: 4.0 °L
1oz Hopunion
French Strisselspalt Alpha 2.3% Beta 8.8%
Aroma – medium intensity,
pleasant and hoppy.
Typical beer styles – Pilsner,
lager, wheat, Belgian-stlye ales, salson, Blere do Garde.
1oz
Brewcraft Czech Saaz Alpha 3.0% Beta 4.4%
Aroma – very mild, pleasant hop
Typical beer styles – pilsner,
lager, lambic, Belgian-style ales.
11.5g
Fermentis dry lager yeast Seattle
1. 2Tbsp to 2 gal hot water to
sanitize everything
2. 170F 3.5 gal add grains to steep and
turn off the heat (8:15pm)
3. Turn on heat at 150F and keep it
there for the remainder of 1 hour (8:45pm)
4. Remove from heat and stir in Dry
Malt Extract (9:15pm)
5. Turn on heat and bring to boil
(9:20pm)
6. Boil 1 hour (9:40pm) with 1oz
Hopunion French Strisselspalt
7. At 40min (10:20) prepare ½ tsp
Wyeast nutrient in 1 cup warm water.
8. At 50min (10:30pm) Wyeast nutrient dissolved in 1 cup warm water
9. 10:35pm add hops #2 Czech Saaz
1oz
10. 10:40pm turned off heat, pour
into plastic bucket, cool in sink, add remaining water and ice
11. Outside in the snow to cool for
15-20 mins (OG 1.050-1.052)
12. Fermentis Lager yeast in 1 cup
warm water
13. Aerate wort with whisk and pour
into carboy (96F)
Add yeast mixture, tube
into sanitized water, leave at 58F room temp.| Lager in secondary, beautiful color. |
Here's where it gets interesting. My yeast said that 58F was just about the max of the ideal temperature range which is the temperature in our house so I fermented the beer on our kitchen counter. It turns out that this was probably a bit warm. I switched the lager into secondary ferment after 3 weeks and decided to put the beer in the colder garage to encourage more of a lager fermentation. I bottled 3 beers when I switched it to secondary and added the sugar tabs to ferment, this did not work. The beer tasted fine and fairly strong but it did not carbonate at all. I finally bottled the lager after 27 days with 7.5 oz priming sugar. I kept the beers in our living room (58F) for the first week and the beers were not fermenting again so I moved the beers to the garage and they had already (after 3 days) shown signs of carbonating. We tried one a few nights later and, despite a slight sweet apple-juice like flavor, there is hope for it yet. It looked like there could have been some mold in the top of the lager after secondary but this doesn't seem to have affected it. A lager ferments very slowly and even an ale will get better and possibly change flavor in the bottle with age. I can say that it is very obvious to me now what a huge role the temperature at fermentation and bottle play in the making of a lager. And the secondary fermentation, especially for a lager, made the beer much more clear, it looks awesome. After all the time my lager did maintain a slight fruity flavor and it carbonated too well in the bottle, a little bit messy but alright. Sorry for the delay, this should have been posted two months ago but I've been away and very busy.
Wednesday, March 13, 2013
IPA or Citrus
I had the most ridiculous day dream about beer tonight while I was washing bottles in preparation for bottling some more beer tomorrow, basically I ran out of room in my oven and empty bottles to do all of my 5 batches that were supposed to be bottled this past weekend.
I'm trying to plan a beer tasting for the middle/end of April and every time I think about it I just get carried away with all the details and I want to make it the biggest, fanciest backyard extravaganza you ever saw. My thought process usually starts like this; if I hold a beer tasting I should have smaller glasses so that everyone can try all the beers because I don't have enough for everyone to have a full beer. I can't afford glasses so I'll have to get smaller plastic cups from Costco or something. I should probably stand up at the beginning and say a little something about the beers. I'd like to have a mini survey for each beer with questions geared to helping even the beer novice point me in the right direction. It would be really nice if I had someone to serve the beers as people went around. And a beer tasting probably wouldn't be quite right without hors d'oeuvres of some sort and obviously people to serve those too. There obviously has to be a way to collect everyone's opinions of my beer and I should be able to answer any questions any of the people have. And what if I don't have enough beer? I should probably have a keg because you know people will want more to drink after. As I slowly realize what I'm doing I also realize I just planned a much more official beer tasting event that would cost thousands of dollars. So that's not going to happen. And if I could even possibly manage to raise any money to support my beer brewing habit I would be very lucky.
All of this reminded me that I need to write in this beer blog because I am falling behind. So now I give you my first attempt at my own recipe.
I'm unsure of whether to call this an IPA or a citrus ale. IPA's in general are supposed to have a citrus flavor while most citrus beers have little to no noticeable hops flavor or aroma. First I've listed my ingredients and some of their characteristics.
I should have used more extract or grains to increase sugar. The OG was very low. I should
have switched hops, using higher alpha acid for the aroma hops and maybe used
less. I should
have done the steeping at a lower temperature, possibly less time. Ultimately I still need a wort chiller or another way to cool my wort faster and to a lower temperature. I let it sit for 16 days and bottled it. It had fermented low enough (1.018) and it came out to about 2.4% alcohol. A secondary ferment would have helped to make my beer clearer. The end product was a little watery although it got better sitting int he bottle (as it usually does). The end result was more of a light and easy slight citrus and slight pale ale.
I've heard most recipes don't tell you how to aerate your wort as I did, however after a number of batches I feel that it is by far the best way to do it. When necessary a whisk works too. My next experiment was a lager and soon after that was the same base recipe with more extract and split into 5 different smaller experiments. 3 of which were citrus focused with different styles and 2 IPA's but with different hop variations (just being bottled now). New posts coming soon.
I'm trying to plan a beer tasting for the middle/end of April and every time I think about it I just get carried away with all the details and I want to make it the biggest, fanciest backyard extravaganza you ever saw. My thought process usually starts like this; if I hold a beer tasting I should have smaller glasses so that everyone can try all the beers because I don't have enough for everyone to have a full beer. I can't afford glasses so I'll have to get smaller plastic cups from Costco or something. I should probably stand up at the beginning and say a little something about the beers. I'd like to have a mini survey for each beer with questions geared to helping even the beer novice point me in the right direction. It would be really nice if I had someone to serve the beers as people went around. And a beer tasting probably wouldn't be quite right without hors d'oeuvres of some sort and obviously people to serve those too. There obviously has to be a way to collect everyone's opinions of my beer and I should be able to answer any questions any of the people have. And what if I don't have enough beer? I should probably have a keg because you know people will want more to drink after. As I slowly realize what I'm doing I also realize I just planned a much more official beer tasting event that would cost thousands of dollars. So that's not going to happen. And if I could even possibly manage to raise any money to support my beer brewing habit I would be very lucky.
All of this reminded me that I need to write in this beer blog because I am falling behind. So now I give you my first attempt at my own recipe.
I'm unsure of whether to call this an IPA or a citrus ale. IPA's in general are supposed to have a citrus flavor while most citrus beers have little to no noticeable hops flavor or aroma. First I've listed my ingredients and some of their characteristics.
1.5lbs
Northwest Crystal Malt/ Carmel C40 (27-33°L)
Provides a light amber-reddish color
and a medium sweet, malty, caramel flavor.
1lbs
Weyermann Caramunich I (lovibond 31-38)
Adds increased fullness,
heightened malt aroma, mouthfeel, deep saturated color. Use up to 5% in lighter
beers, up to 10% in Darker Beers. Recommended for Oktoberfest, Bock, Porter,
Stout, Red Ale, Amber Ale etc. This one is the lightest of the CaraMunich Malts.
Country of origin: Germany
.5lbs
Northwest Pale Ale Malt (2.6-3°L)
A
slightly darker base malt than our Premium 2-Row, our Northwest Pale Ale Malt
is produced from well-modified, Western-grown 2-Row barley, with a kilning
regimen based closely on traditional British Pale Ale malting practices.
Contributes a malty complexity to beer flavor and aroma. Excellent in American
Pale Ales and American versions of British beer styles.
3lbs Briess
Dried Malt Extract – Golden Light
An
excellent light-colored pure malt extract. Use alone for light-colored beers,
or with specialty malts to brew beers of all styles. Excellent for boosting
gravity and yeast propagation. Made from Base Malt and Carapils® Malt. Color:
4.0 °L
1oz
Hopunion Citra Alpha 14.1% Beta 3.5%
Aroma – strong citrus and tropical
tones, grapefruit, melon, lime, gooseberry, lychee.
Typical beer styles – American-style
pale ale, IPA, Double IPA.
1oz
Brewcraft Centennial Alpha 8.7% Beta 4.6%
Aroma – medium intensity, floral and
citrus.
Typical beer styles – US ales, IPA,
wheat.
1oz Brewer’s
Best Sweet Orange Peel
5oz
Brewer's Best priming sugar
Wyeast
Beer Nutrient Blend
1. 2Tbsp Sanistar to 2 gal hot water to
sanitize
2. 170F 3.5 gal add all grains to steep
1 hour. (7:04pm)
3. Turn off heat and stir in Dry
Malt Extract (8:04pm)
4. Turn on heat and bring to boil
5. Boil 1 hour (8:23pm) add hops Citra 1oz
6. After 50min (9:14pm) add ½ tsp Wyeast nutrient dissolved in 1 cup
warm water
7. Add hops Centennial
1oz and sweet orange peel 1oz 9:16pm
8. 9:23pm turned off heat, pour into
plastic bucket, cool in sink, add remaining water and some ice
9. Outside in the snow to cool for
15-20 mins
10. 9:47pm muntons regular yeast in 1
cup warm water
11. Aerate wort between buckets 8
times (100F – 1.030gravity)
12. Add yeast mixture, lid, airlock, and leave at room temp (58F)
| Weeks later...my creation compared to a Blue Moon |
| My creation also compared to Lagunitas Hop Stoopid Ale |
And as I learned they say in the home brewing community, RDWHAHB; Relax, don't worry, and have a home brew!
Monday, March 4, 2013
True Brew Nut Brown Ale
The third and last recipe kit I tried was a nut brown ale. I made a few changes to the recipe, as I saw fit at the time, to keep with the success I had with the first few beers. The result was a little sweeter than I would have liked but not uncommon for a nut brown ale. I left this for longer than the first two beers, still no secondary ferment. After this posts come the fun posts about my own brew experiments, things actually get interesting.
Sunday, March 3, 2013
Irish Stout
![]() |
| Midwest Supplies Irish Stout |
Having read a bit more about different types of beer and having learned from my experiences and conversations with others I know why the directions aren't the same every time. Obviously there are a lot of variables in the brewing process and each one has an affect on the outcome of your brew. The beer is designed from the grains chosen to make it, the hops and other flavoring agents used to enhance it, the steep mash or boil times and temperatures, the time of hops additions and the strength of those hops, the types of other enhancers you use for either raising the OG or certain flavors like molasses and maple syrup*, how long you leave your beer to ferment, whether you do one or two ferments, the temperature your beer ferments at, and how long you leave your beer to bottle. Those aren't even all of the potential variables, I assure you there are more.
Coming in the next few weeks will be the updates on my current brews, all from my own recipes including the most recent oatmeal breakfast stout and the latest to be bottled (today) a European style lager. I wanted to mention these so that I could segue to leaving you with this interesting article. In making the recipe for my oatmeal stout I did some research on the difference between a stout and a porter and came across this article. I've learned so much already and I'm just getting started.
Coming in the next few weeks will be the updates on my current brews, all from my own recipes including the most recent oatmeal breakfast stout and the latest to be bottled (today) a European style lager. I wanted to mention these so that I could segue to leaving you with this interesting article. In making the recipe for my oatmeal stout I did some research on the difference between a stout and a porter and came across this article. I've learned so much already and I'm just getting started.
Thursday, February 21, 2013
So I decided to start brewing my own beer...
I think at some point in every man's life there comes a time when he thinks that brewing his own beer is a great idea. For me this came back in the fall of 2009 however, I had no job, I was a full time college student, and I had little money and none of it was my own. This meant I couldn't afford the home brewing equipment despite the surprisingly cheap initial start up cost. I decided wine would be much easier and cheaper, and with a higher alcohol percentage it was definitely what I wanted. I did five batches of wine, five different gallons. I bought a champagne yeast and some chemicals that were supposed to help. I found some simple directions online and I tried to make wine. My carboys were gallon size apple juice jogs, my airlocks were balloons with pin holes. All of my batches failed. They were drinkable sure. They had alcohol in them too. But they smelt like bread and they didn't taste great.
I didn't try brewing again until August 2012, about 3 years later. I joined a coupon website on the off chance that they would offer something I wanted and came across the coupon for a brew kit with a recipe kit for something like $60. My first brew was an Irish Red Ale. I knew almost nothing about what I was doing except what How to Brew and the instructions that came with the recipe kit told me. It just so turns out that those instructions were all I needed. I was very happy three weeks later when my beer was not just drinkable, but enjoyable by most everyone. I rushed my first batch a bit more than I do these days but it worked. The minimum brew time, from my experience and readings, is two weeks for fermentation and one week for bottling. I have since changed my ways but I'll get to that later.
![]() |
| Irish Red Ale Recipe from Midwest Supplies |
Subscribe to:
Posts (Atom)



